SZC(B)-10~13 series intelligent 3-Phase indoor dry-type Distribution transformer General: This product conforms to the national standard GB1094.1-2013(IEC 60076) power transformer and GB / T6451-2015 indoor dry-type transformer technical parameters and requirements. Epoxy resin pouring transformer is a solid insulation encapsulated winding power transformer. Epoxy resin dry-type transformer uses epoxy resin as insulation material.High and low voltage winding is made of copper strip (foil), epoxy resin is poured and solidified in vacuum to form high strength FRP body. Insulation grade is F and H. Epoxy resin dry-type transformer has the characteristics of good electrical performance, strong lightning shock resistance, strong short-circuit resistance, small size and light weight etc.. The temperature display controller can be installed to display and control the operating temperature of the transformer winding to ensure the normal service life of the transformer. Compared with the manual voltage regulation of traditional SCB series indoor dry 3-phase power transformer, SZC(B)-10 SZC(B)-11 SZC(B)12 SZC(B)13 series intelligent 3- Phase indoor dry-type Distribution transformer can realize the load through the controller on the ground remote power transformer to adjust the voltage, which can realize free power voltage regulator, reducing frequency of climbing and risk, greatly convenient for power operation personnel on site. Type meaning