| Customization: | Available |
|---|---|
| After-sales Service: | None |
| Warranty: | 1 |
|
Still deciding? Get samples of US$ 12/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
Description Smart meter N52-2068 can to be measure and display AC voltage, AC current, active power, power factor, frequenceand electric energy at same time. After the meter to be connect to 2.4G wifi and bind with your wechat or app, you can seeall of the electric parameters in your cell-phone any where, at the same time the app will show the statistics of the days.month and year of the electric energy.
Specification 1.measurement accuracy: 1%+2 word2.sample frequency: 2 per second 3.measurement parameters: AC voltage:40-300V AC current: 0.00 -100.0A Real power:0-30000.0W Electric energy: 0-99999kwh ( Unlimited in app) Frequency: 50Hz Power factor: 0.00-1.00 4.Installation size: 54x48x80 mm 5.Installation method: Din-Rail (C45 35mm) Installation instructions 1. Connect the measured voltage to terminals 1-2 on the meter (terminals 1-2 do not distinguish between zero and live wires) 2. Built-in transformer: As shown in Figure 1, thread the wire of the measurement circuit through the circular hole inside the instrument 3. External transformer: As shown in Figure 2, connect the transformer provided with the meter to port 3-4 and thread the measurement circuit wire through the circular hole of the secondary transformer Note: For passing through the transformer, either the zero line or the live line can be selected, and the direction of passing through is not distinguished 4. Confirm that the power supply does not exceed the maximum range of the meter before powering on, and the meter can operate normally Distribution Network Description For WiFi smart meters installed on rails, it is recommended to install the distribution network before installation. After the distribution network is successful, installation can be carried out. The distribution network can use the test power cord shown in the figure to connect the 1-2 terminals of the smart meter to the power socket for testing Note: The test power cord provided with the machine is only for use in distribution network testing. Please pay attention to electrical safety during testing, as the power it can withstand is limited and cannot be used in formal installation or for other purpos |
){kind=link}